Blueprints of stairs, introduced on the web, make it simple to choose the right option. But every home has its own layout attributes. Therefore, ready-made solutions might not operate. Yes, also left by his own hands drawing, and which will later be installed stairs, is going to be a unique source of pride of their owner in front of relatives, neighbors, friends.
To begin with, decide the location of the future design and create the following measurements:
- The height of the opening. Since the basis has been taken the finishing flooring, the second and first floors. The distance from you to the other is the necessary parameter.
- The width of this opening. It must be mentioned that it may have another configuration: by the most widely used – rectangular to formed (ring, oval or other non invasive performance). This parameter significantly affects the selection of layout.
- Height from the ceiling to the floor of the floor. In the future will let you compute the height of the passing and the correct design and building of the stairs in the home.
Diagram and drawing of the staircase with dimensions in height and width. Draws a scale design of the first floor at a private home. A place is well defined for the start of the staircase, the length of the flight of stairs is marked on the ground. If the layout of this first floor at the area of this structure has projections, door and window openings, niches, communications, and then they’re drawn in the scheme using a reference to the supporting structures. These stop them from overlapping even at the design phase. The further details and measurements in the plan, the fewer problems during installation.
Before developing a drawing, you should carefully examine the building standards for stairs:
- The thickness, width, height of these steps along the full length of this structure should not change. This ensures the ease and security of motion;
- The width of the stairwell for directly flights of stairs must be from 900 mmfor spiral structures from 800 mm
- The elevation of this weapon 900-1200 mm. It’s Better if it is provided on both sides of the staircase;
- The drawing together with the dimensions of elevation of a ladder handrail
The thickness of a straight step is advocated from 200 to 400 mm (optimal from 250 to 320 mm). For penalizing layouts on the narrowest portion of 100 mmon the wide to 400 mm, in the middle of 200-250 mm. Overhang of treads up to 50 mm is allowed;
- The elevation of these steps ought to be in the scope of 100-180 mm
- The angle of incline around 45˚;
- When the stairs go directly to the door, is equipped with an additional platform width of at least a meter;
- The recommended number of steps for you airport – 18 pcs.
- Proper drawings of the staircase to the second floor can be made just on the basis of those parameters and additional calculations. Each form of structure has its own attributes.
There Are Numerous ways to compile layout documentation:
- Independently. Create a calculation and perform stairs drawing for simple layouts (directly, rotary using a stage ) under pressure for all. More Elaborate options are much better left to professionals
They permit you to make a comprehensive design, to have a visualization of the arrangement prior to installation and to make adjustments. Using 3D pictures you may observe how the staircase will fit in the surrounding interior. In this case it may take a few days to master the applications;
- Ready-made solutions. Drawings of stairs introduced on the Internet could be provided with detailed detailing and with no. Such projects should be assessed for compliance with calculations and construction regulations. For advice, it is possible to turn to https://masterprofnastila.ru/ professionals.